• seac-banche-rs40-extendable-desktop-reader-sorter-1
  • seac-banche-rs40-extendable-desktop-reader-sorter-2

Extendable Desktop Reader Sorter

The Seac Banche RS 40 capitalises on the superior quality of the SB 4000 range of back-office scanners, increasing the autofeeder capacity and providing pocket expansion in modules of six, each with the same footprint as the base unit.

The Seac Banche RS 40 capitalises on the superior quality of the SB 4000 range of back-office scanners, increasing the autofeeder capacity and providing pocket expansion in modules of six, each with the same footprint as the base unit. This new desktop reader sorter is equipped as standard with an Ultrasound doubles detector, ensuring maximum protection.

The sorting modules allow configurations up to 24 pockets, uniquely designed to make them virtually jam-proof, and communicate with one another and with the base unit using no cables, via infrared light.

Depending upon processing requirements and document size, the device can achieve throughput rates of 200 documents per minute and above.

With a daily processing capacity of 10,000 to 20,000 documents, the RS 40 is ideal for cheque processing in regional clusters and clearing houses, as well as remittance and non-cheque applications (lottery tickets, gift coupons, meal vouchers etc.).

AUTOMATIC DOCUMENT FEEDER
The autofeeder can hold up to 500 standard documents, and allows refilling without interrupting processing.
To ensure that only one document enters the paper path at a time, the unit is equipped with a totally reliable Adaptive Ultrasound double feed sensor, located immediately after the feeder.

CODELINE READING: MICR AND OCR
The unit’s MICR reading functionality decodes both CMC7 and E13B magnetic codelines. Reliability of the system is based on the experience of thousands of Seac Banche codeline readers installed worldwide.
The proprietary onboard decoding system for OCR documents (optional) can read OCR-A, OCR-B and E13B codelines and mixed font OCR-B X E13B (UK Bank Giro), with outstanding accuracy and reliability. The OCR system can also be used for barcode reading.

IMAGE PROCESSING
The RS 40 uses the same advanced imaging technology that has defined the success of the Seac Banche RDS 3000 and SB 4000. Images captured by the RS 40 are perfectly clear and sharply defined. At standard speed (433 mm/sec), the system allows for up to three separate images of a document to be captured in a single pass. Images are scanned under program control and can be used to provide input to OCR/ICR character recognition systems, allowing for the acquisition of reliable and accurate data, or displayed for visual verification or manual key entry, as well as stored for archive and retrieval.
Resolution can be selected via application software, independently for front and rear images – 200 x 200 dpi or 100 x 100 dpi, 256 shades of grey, green or red light source (the latter showing red dropout images).
An enhanced version – the RS 41 – captures front and rear images in outstanding full colour, without losing the ability to capture greyscale images.
The images can be compressed by DLL functions in several formats, according to user needs.

VOIDING AND ENDORSING
The programmable inkjet endorser can print a variable string of data on the rear side of the document, up to full document width. The optional roll-on stamp can be factory installed to stamp either the front or rear of documents: the pad can be personalised by the user, and it is automatically inked before each stamping action by an inking roller.
Voiding and endorsing are controlled by the application.

POCKETS
The RS 40 includes a sorting module of six pockets, individually adjustable in length, distinctively designed to prevent paper jams and equipped with pocket-full sensors. Each pocket has a capacity of about 200 documents.
Additional modules can increase the configuration up to 12, 18 or 24 pockets with no need for extra cables, thanks to infrared communication.
The sorting criteria are set by the application.

MODEL
RS 40: standard speed 433 mm (17”)/sec
RS 40: high speed 866 mm (34”)/secPAPER HANDLING
Automatic document feeder, capacity up to 500 documents.
Adaptive Ultrasound double feed control.
Six collection pockets, capacity 200 documents each.DOCUMENT SPECIFICATIONS
Width: 100 to 225 mm (3.94” to 8.86”)
Height: 52 to 108 mm (2.05” to 4.25”)
Weight: 70 to 140 g/sqm (18.7 to 37.3 lbs)CODELINE READING
MICR: magnetic fonts CMC7 and E13B
OCR (optional): optical fonts OCR-A, OCR-B, E13B
Barcode reading via OCR head (at standard speed only)IMAGE CAPTURE
Standard speed: up to 3 images in one pass (front, rear, front with red dropout).
High speed: front & rear images in one pass . 200×200 dpi or 100×100 dpi.
Higher resolutions: 240 or 120 dpi available by reducing the track speed  (MICR reading not supported).
256 grey levels.

IMAGE FORMAT
Bitmap, Jpeg, Tiff, G4 (B/W)

INTERFACE
USB 2.0

API SOFTWARE TOOLS
Designed for Windows (XP or later version required) and Linux

MINIMUM REQUIREMENTS
Pentium IV or equivalent – 2 GHz, USB 2.0 full-speed port
For Host PC 512 Mb RAM, Windows 2000 or higher OS.

DIMENSIONS
Length: 1020-2580 mm (40.2”-101.6” )
Width: 265 mm (10.4”)
Height: 240 mm (9.4”)

Main machine
Dimension: 63x40x40h
Weight Kgs: 14
Extension
Dimension: 63x40x40h
Weight Kgs: 12

ADDITIONAL FEATURES

Rear Inkjet Printer (optional)
Programmable single-line endorser, application controlled.

Front or Rear Stamp (optional)
Roll-on stamp in the track with inking roller
Maximum dimensions: 47 x 18.5 mm (1.8 x 0.7”)

Additional Sorting Modules (optional)
6 pockets each . up to 3 extra modules may be added (max. 24 pockets, 4 modules).